Basic principle:
The equipment utilizes helium as a tracer gas, places the workpiece in a vacuum chamber and fills it with helium, and rapidly and accurately judges the leakage of the plate heat exchanger through the leak detector.
Certificazione :
Calibration Certificate(cost additional)Prezzo :
NegotiableTempo di consegna :
90 DaysTermini di pagamento :
L/C, T/TMarchio :
HCTENumero di modello :
HCTE0027Product Introduction:
In the internal leak detection cycle, helium is filled into chamber B of the workpiece to detect internal leaks between chamber A and B. In the external leak detection cycle, both chambers A and B are simultaneously filled with helium to detect external leaks of the chamber. Utilizing the helium leak detector, the leakage condition of the plate heat exchanger can be accurately and quickly determined with high precision.
Product Parameters:
Leak Detection Stations |
2 Stations One is used to detect internal leakage of workpieces, and the other is used to detect external leakage of workpieces |
Test Chamber Size |
Customized Based on Customer Requirements |
Bulk Leak Detection Gas |
Nitrogen or Dry Compressed Air |
Bulk Leak Detection Pressure |
5.5 MPa (Customizable Based on Customer Requirements) |
Fine Leak Detection Gas |
100% Helium |
Fine Leak Detection Pressure |
1.0 MPa (Customizable Based on Customer Requirements) |
Alarm Leak Rate |
1.0E-6 Pa.m³/sec. (Customizable Based on Customer Requirements) |
Production Cycle Time |
480 Small Workpieces or 240 Large Workpieces in 8 Hours (Customizable Based on Customer Requirements) |
Helium Recovery Rate |
≥98% |
HOT TAG :